Digital instrument for automatic measurement of pH of water. Easy to use, conducts accurate measurements

Tester Kokido K977CS - the easy way to check the pH level

The effectiveness of the use of chemicals for swimming pools depends on the acidity and alkalinity of the treated water. The deviation from the allowable pH (more than 7.6 and below 7.2) causes the appearance of a sharp unpleasant odor of water, increased plaque build-up and deposits. The pool with such water reacts badly to the chemical preparations used. A systematic check of the pH of the pool is the key to maximizing its productive processing. The Kokido K977CS automatic tester will help you to precisely and accurately measure the pH value in the pool. The device is able to record readings in the range of 0.0 - 14.0 pH at positive ambient temperature (up to +50 C). The device will be useful in both professional activities, and for simple home use.

Features of the Kokido K977CS tester

The tester is equipped with automatic temperature compensation (ATC), which guarantees accuracy of readings for any thermal fluctuations and changes in the volume of the controlled solution. The device is powered by four replaceable AG13-batteries of 1.5V. Kokido K977CS is simple and reliable, guided by clear instructions you will configure the device and its use will not cause any difficulties. The LCD display on the tester case clearly demonstrates the actual pH value with an error of up to 0.01. Recall that for swimming pools the normal value is from 7.2 to 7.6 pH. If the pH values ​​are too high, it is recommended to adjust the level with AquaDoctor pH Minus (-), if lowered, use AquaDoctor pH Plus (+).

Point calibration of the Kokido K977CS tester

  • Remove the top cover to gain access to the trimmer.
  • Immerse the electrode in the attached pH 6.864 buffer solution and gently stir.
  • Hold the time until the readings stabilize. Using a small screwdriver, turn the trimmer until the pH display (corresponding to the outside temperature) indicated on the bottle is displayed on the instrument.
  • Remove the device from the calibration solution and gently rinse the electrode with distilled water.
  • Wrap the electrode with filter paper (not included) to dry.
  • Immerse the electrode in the attached pH 4.003 buffer solution and gently stir.
  • Hold the time until the pH stabilizes and the pH appears on the display (corresponds to the outside temperature) indicated on the bottle.
  • Remove the device from the calibration solution and gently rinse the electrode with distilled water.
  • Wrap the electrode with filter paper (not included) to dry.
  • Replace the cover.
 

Write a review

Note: HTML is not translated!
    Bad           Good

Tester Kokido K977CS digital pH meter

  • Brand: Kokido
  • Product Code: Тестер Kokido Цифровой
  • Availability: By order
  • 930грн

  • Ex Tax: 930грн

Related Products

AquaDoctor WC

AquaDoctor WC

The granulated preparation effectively affects the smallest particles that pollute the pool water. U..

750грн Ex Tax: 750грн